Page 1
TRACKER T1007 GPS TRACKER USER MANUAL Preface Thank you for purchasing GPS Vehicle Tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release.
1 Summary Working based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS,and guard against theft of Vehicle. 2 Applications l Vehicle rental / Fleet management,etc. l Protect the child / the elder / the disabled / pet,etc. l Businessmen safety.
4 Specs. Content Specs. Dim. 80MM*56MM*22MM Weight Network GSM/GPRS Band 850/1800/1900Mhz or 900/1800/1900Mhz GPS chip SIRF3 chip GSM/GPRS Siemens MC55 or Siemens MC56 module GPS sensitivity -159dBm GPS accuracy Reacquisition 0.1s Cold status 45s Time To First Fix Warm status 35s Hot status 1s Battery DC5V input...
Page 6
Push downwards to open the cover Pull leftwards and insert the simcard After SD card is mounted, Fasten downwards ,make sure the SD card is mounted Fasten the simcard rightwards Fasten the cover Put the battery upwards...
6 Startup l Put the SIM card and SD card in place, install batteries locator will automatically boot. l After startup middle green quickly ablaze, left GMS yellow colored long bright 2 seconds, right of GPS blue lights for not bright, and 20-30 seconds in the middle of the green light will shine out 1 second for 3 seconds left GMS parade every 3 seconds, a shiny for GSM now working normally.
8.2 Change the Password Send SMS “password+old password+space+new password” (default password: 123456), it will reply “password ok” TO:13188888888 From:13188888888 password123456 888999 password ok 8.3 Authorization 8.3.1 Send SMS “admin+ password+ space+ cell phone number “to set the first authorized number, it will reply “admin ok”, The other authorized numbers should be by the first authorized number.(PS: There are only 5 numbers able to be authorized) 8.3.2 Send SMS noadmin+password+space+authorized number to cancel the authorized number.
0.00 === speed 14/08/09 06.54== Date&Time F:3.85V battery power 1 == charging 0 means charging Signal:F ==== Full GPS signal 0 means weak GPS signal 354776031555474== IMEI 05=quantity of satellites ( from 3 to 12 ) 43.5=Altitude 460 = MCC Mobile Country Code 01 == MNC...
From:13188888888 T030s***n ok 8.4.2 Send SMS t030s***n+password to the unit, it will reply SMS heaps of times. You will receive a reply as “t030s005n OK” ( t030s***n ok ) if the setting is successful. 8.4.3 Cancel: Send notn+password to delete the “ auto track “,it will reply “notn ok”。 Remark: the interval must not be less than 30s.
8.6 GPS-refresh setting Send SMS “GpsAutoSearch123456 120”,it will reply “GpsAutoSearch ok”. The tracker will search gps signal in 120s interval after setting this. The refreshing time is between 120-600 seconds(120<interval <600) (note: Longer standby time for longer refreshing time and shorter standby time for shorter refreshing time.) 8.7 Reboot remotely When using the region GPRS signal not, causing GPRS stuck not while sending data can be...
8.8.2 Cancel:Send SMS “nostockade+password” to deactivate this function.It will reply “nostockade ok”。 From:13188888888 TO:13188888888 nostockade ok nostockade123456 This function will be out of effect after the unit moves outside the district. 8.8.3 Response SMS format: stockade!+geo-info. It will alarm one time in each setting. From:13188888888 lat: 22.566923 long: 114.051331 speed: 0.00...
8.9.2 Cancel: Send SMS nomove+password to deactivate the movement alert,it will reply move ok This function will be invalid after getting one movement alert Response SMS format: :move!+geo-info. It will alarm one time in each setting. From:13188888888 lat: 22.566923 long: 114.051331 speed: 0.00 28/11/10 03:33 F:4.32V,0, Signal:F move...
8.10.2 Cancel: Send SMS”nospeed+password “to deactivate the overspeed alert,it will reply” nospeed ok。” TO:13188888888 From:13188888888 nospeed123456 nospeed ok Response SMS format: speed+080!+Geo-info (suppose the speed is 80km/h). The tracker will check the speed in 3 minutes interval and alarm if it is overspeed. From:13188888888 lat: 22.566923 long: 114.051331 speed: 0.00...
8.12 Time Zone setting Send “time zone+password + GMT time, reply “time zone ok”. (Note: if GMT time is positive, just write the number 1. If time zone is negative, have to write –1) TO:13188888888 TO:13188888888 From:13188888888 Time zone23456 1 Time zone23456 -1 time zone ok 8.13 SOS Button...
http://maps.google.com/maps?f=q&hl=en&q=22.567610,114.051227&speed: 0.00 12/11/10 14:36 F: 4.22V Signal:F imei:012207000691839 8.14.3 Send “smstext123456”, it will reply “smstext OK”. The tracker will reply normal SMS format for this command 8.15 SMS ONE Send “smsone+password”.The tracker will reply one SMS to admin number or gprs server. The same function with real-time tracking, but no need to call just send this command 8.16 Low Battery Alert...
8.18 GSM ID this function can be added or deleted for customization.) GSM ID is in each sms or gprs data. The tracker can be found by GSM ID without gps signal. But the customers have to ask their GSM operator for data base of the GSM ID.
8.21 Switch on/off 8.21.1 Switch off Press TALK button and SOS button for three seconds, the green indicator will flash quickly until it is off. 8.21.2 Switch on Press TALK button and SOS button for three seconds, the green indicator will flash quickly until it is on.
11 GPRS setting APN(access point name), IP, PORT have to be set up for gprs function. Apn user, apn password has to be set up also if there are. So please contact with the gsm operator for them 11.1 Set GPRS protocols 11.1.1 Set TCP protocols: Send SMS Gprsmode+password+space+0 to set up Protocol, tracker will reply GPRSMODE ok。...
11.5 Set APN’s Password Setup: apnpasswd+password+space+the sim card’s password. If setup successful, the tracker will reply SMS “apnpasswd ok”. Cancel: The old APN password will be invalid automatically when a new APN password is set. 11.6 GPRS setting The tracker will hang off the calling in gprs mode when authorized number calls to the tracker, then send gprs data to the server.
1. Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry. 2. Don’t use & store the unit in dusty places. 3. Don’t put the unit in overheated or overcooled places. 4. Handle carefully. Don’t vibrate or shake it violently. 5.