Connecting To Listed Access Points - Canon PowerShot G3 X User Manual

11
Import images.
Click [Import Images from Camera], and
z
then click [Import Untransferred Images].
Images are now saved to the Pictures
z
folder on the computer, in separate
folders named by date.
Click [OK] in the screen that is displayed
z
after image import is complete.
Use Digital Photo Professional to view
z
images you save to a computer. To view
movies, use preinstalled or commonly
available software compatible with
movies recorded by the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
● If you prefer not to display recent target devices, choose MENU
( = 31) ► [ 4] tab ► [Wi-Fi Settings] ► [Target History] ►
[Off].
● You can also change the camera nickname on the screen in step
2 ( = 142).
● When the camera is connected to a computer, the camera screen
is blank.
● Mac OS: If CameraWindow is not displayed, click the
[CameraWindow] icon in the Dock.
● To disconnect from the camera, turn off the camera.
● If you chose [PIN Method] in step 6, a PIN code will be displayed
on the screen. Be sure to set this code in the access point.
Choose a device in the [Select a Device] screen. For further
details, refer to the user manual included with your access point.

Connecting to Listed Access Points

][ ] buttons to
1
View the listed access points.
View the listed networks (access points)
z
as described in steps 1 – 4 of "Using
WPS-Compatible Access Points"
( = 142).
2
Choose an access point.
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose a network (access point),
and then press the [ ] button.
3
Enter the access point password.
Press the [ ] button to access the
z
keyboard, and then enter the password
( = 32).
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose [Next], and then press the
[ ] button.
4
Choose [Auto].
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose [Auto], and then press the
[ ] button.
To save images to a connected computer,
z
follow the procedure from step 8 in
"Using WPS-Compatible Access Points"
( = 142).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
144