Loewe Viewvision DR+DVB-T Operating Manual page 66

Troubleshooting
Problem
A disc that was recorded to from this Recorder
cannot be played on a different DVD player.
Playback not possible or unsuccessful.
Timer recording not possible.
Stereo-audio recording and/or playback
unavailable.
The remote control is not working properly.
Interference is visible at the top and
bottom edges of the screen.
The recorder is not working normally.
- 66
Possible cause
Some players do not play discs with finalisation in
video mode.
The disc was recorded in VR mode.
The ability of CD-R / RWs (MP/WMA, JPEG,
(X)VCD, (X)SVCD) and DVD+R / RWs and DVD-R
/ RWs is influenced by the recording equipment,
recording methods and data media. Therefore,
there may be problems occasionally when playing
on conventional DVD players.
There is insufficient space on the disc.
The source that you want to record is copy-protected.
Copy-protected broadcasts cannot be recorded on a
video mode disc.
The time has not been set correctly on the recorder.
The timer was wrongly programmed.
The time between programming the timer and the
start of recording is too short.
After programming, the timer recording symbol is no
longer displayed.
The television is not stereo-compatible or the
broadcast transmission is not in stereo format.
The Recorder's A/V Out sockets are not connected
to the TV's A/V In sockets.
The Recorder's audio/video Out has not been
selected for the television.
The DVD recorder's TV audio channel must be set
to Mono.
The remote control's batteries have run out.
Unfavourable resolution setting in HDMI mode.
The unit is in an undefined state.
Remedy
No solution.
The other player must be RW-compatible.
No solution.
Use a different disc.
You cannot record the source.
Use a disc formatted in the VR mode for once copiable
material.
Set the correct time. See "Setting the time automatically" or
"Setting the time manually" on page 7.
Re-program the timer. See "Timer recording" on page 51.
The recording's start time must be at least  minutes into the
future.
Re-program the timer.
No solution.
Make the A/V connections.
Select the AUX or A/V source as the TV input.
Set the TV's audio channel to stereo.
Replace the old batteries with new ones.
Set the resolution to 1080i with the RES button (page 7).
Reset the recorder (page 0).