Adjustment; Required Test Equipment - Alinco DJ-195 Service Manual

ADJUSTMENT

1) Required Test Equipment

The following items are required to adjust radio parameters:
1. Regulated power supply
2. Digital multimeter
3. Oscilloscope
4. Audio dummy load
5. SSG
6. Spectrum Analyzer
7. Power meter
8. Audio volmeter
9. Audio generator
10.Distortion meter/SINAD meter
11.Frequency counter
Supply voltage:
Current:
Voltage range:
Current:
Input resistance:
Measurable frequency: Audio frequency
Impedance:
Dissipation:
Jack:
Output frequency:
Output level:
Modulation:
Measuring range:
Measurable frequency: Up to 200MHz
Impedance:
Measuring range:
Measurable frequency: Up to 100kHz
Sensitivity:
Output frequency:
Output impedance:
Measurable frequency: 1kHz
Input level:
Distortion:
Measurable frequency: Up to 200MHz
Measurable stability:
5-14V DC
3A or more
FS = Approx. 20V
10A or more
High impedance
8Ω
1W or more
3.5mmΦ
200MHz or more
-20dBu/0.1uV -120dBu/1V
FM
Up to 2GHz or more
50Ω, unbalanced
0.1W -10W
1mV to 10V
67Hz to 10kHz
600Ω, unbalanced
Up to 40dB
1% - 100%
Approx. +/-0.1ppm
21