Panasonic Road Choice 1000-RIO160U Operating Instructions Manual page 11

Radio (AM/FM)
Caution
To ensure safety, never attempt to preset sta -
tions while you are driving.
[SRC] (Source)
selects a source.
[BAND]
selects a band in the radio source.
(APM) (Auto Preset Memory)
executes APM in the radio source
(by holding it down for more than 2
seconds).
Operation Flow
1
Press [SRC] to select the radio source.
2
Press [BAND] to select a band.
3
Select a station.
Frequency Adjustment
[6 ]: Lower
[7 ]: Higher
Note: For station search, hold down either of the buttons
for more than 0.5 seconds and release it.
Preset Station Selection
Press the corresponding preset button from [1]
through [6] to tune in a preset station.
Radio Source Display
Band
lights while receiving an FM stereo signal.
[DISP] (Display)
switches the information
on the display.
Frequency Preset Number
[6 ] [ 7 ]
decreases/increases the frequency. (For seek tuning, hold it
down for more than 0.5 seconds and release it.)
Preset buttons [1] through [6]
select a preset station in the radio source, preset
the current station (by holding it down for more
than 2 seconds).
Display Change
Press [DISP] to change the display.
cd
Station Preset
Up to 6 stations can be preset in each of AM, FM1, FM2,
and FM3.
Preset stations can be simply called up by pressing [1]
through [6].
Auto Preset Memory (APM)
With this operation, stations with good receiving condi
tions can be automatically stored in the preset memory.
1
Select a band.
2
Hold down [BAND] (APM) for more than 2 sec -
onds.
The preset stations under best receiving conditions are
received for 5 seconds each after presetting the stations
(SCAN). To stop scanning, press one of the buttons
from [1] through [6].
Note: New stations overwrite existing saved stations.
Manual Station Preset
1
Tune into a station.
2
Hold down one of the preset buttons from [1]
through [6] for more than 2 seconds.
Note: New stations overwrite existing saved stations.
Radio mode display (Default)
Clock display
-
(blinks once)