Installation Preparation; If The Refrigerator Can Not Pass Through A Door During Installation, Follow These Steps; Removing Freezer Door - Daewoo FRS-X22D3TNP User Manual Manual

Installation Preparation

Check if the refrigerator can pass a doorway or
enter a door first.
Dimensions (including Door Handles)
(Width*Depth*Height) 906mm X 735mm X 1770mm
Find a suitable place to install
Ensure sufficient space from the back of refrigerator to the
wall for free air ventilation.
Avoid direct sunlight.
Once the installation place is ready,
Note
follow the installation instructions. If the
surrounding temperature of the refrigerator
is low (below 5°C), foods can be frozen or
the refrigerator can function abnormally.
If the refrigerator can not
pass through a door
during installation, follow
these steps.
(This guide refers to several models. The real features
are model dependent.)

Removing Freezer Door

Remove front bottom cover first, if it is attached.
1 Pull out bending tube guide and the left water tube.
(Dispenser models only)
2
Unscrew top hinge cover with a screw driver.
3 Turn top hinge fastener counterclockwise 3~4 times.
Disconnect the harness wires.
4 Lift up the front of hinge to remove. (After the hinge is
removed the door can fall down forward. Be careful!)
5 Be careful not to damage the water line when
removing the door.
13