Casio Privia PX-360M User Manual page 32

To change how an Auto Accompaniment is played
1.
On the editing type selection screen (page EN-29), touch "Parameter Edit" to display the auto
accompaniment play editing screen shown below.
Parameter
2.
Touch the parameter whose setting you want to change, and then use the bs w, q buttons to
change the setting value.
Parameter Description
Synchro Type: Selects the synchro standby status and type when
Synchro type the music preset is selected.
Intro Chord: Selects from among major (12 keys) and minor (12
Intro chord keys) for the intro chords.
Ending Chord: Selects from among major (12 keys) and minor (12
Ending chord keys) for the ending chords.
Auto Fill-In: Specifies whether or not a fill-in should be
Auto fill-in on/off inserted into the final measure of a chord
progression.
Timing Set: This parameter lets you add different variations to
Chord progression the timing of the chord progression being edited.
variation You can use it to match the chord progression to
the beat of a specific rhythm.
For information about differences in playback for
each setting value, see "Timing Setting and Chord
Progression Playback" (page EN-32).
3.
After you are finished, touch bq EXIT to return to the editing type selection screen (page EN-29).
Setting
Setting
Off (no standby)
Normal: From standby to normal pattern
Variation: From standby to variation pattern
Intro: From standby to intro pattern
C to B: Major (C to B)
Cm to Bm: Minor (Cm to Bm)
C to B: Major (C to B)
Cm to Bm: Minor (Cm to Bm)
Off: Fill-in not inserted
On: Fill-in inserted
Normal, Half, Double, 3/4, 3/2
Music Presets
EN-31