Table of Contents
Advertisement
Operating the built-in answering device
Listening to all of the recorded
messages
Press
(Playback/Record) when new messages
are not recorded.
When new messages are recorded, only the new
messages will be played back.
After the messages are played back, the following will be
displayed.
To erase the messages, press
To save the messages, press
Erasing a specific message
Press
(Flash/Erase) while listening to the
message you want to erase, then press
Erasing all of the recorded
messages
1
Press
(Function/Set).
2
Press
3
Press
(Function/Set).
4
Press
.
ｽﾍﾞﾃ
ｼｮｳｷｮ ｼﾏｽｶ？
ﾊｲ＝ ｲｲｴ＝＃
.
.
.
.
ﾖｳｹﾝｦ ｽﾍﾞﾃ
ｼｮｳｷｮ ｼﾏｽｶ？
ﾊｲ＝ ｲｲｴ＝＃
Operating the answering device
from a remote location
Preparation: Setting the remote operation ID
1. Press
(Function/Set).
2. Press
3. Press
(Function/Set).
4. Enter any 4-digit number (remote operation ID) except
or #.
5. Press
(Function/Set).
6. Press
(Stop).
Operation: Listening to a recorded message from a
remote location
Turn the
(Auto Answer) light on before you go out.
Remote operations are available only from a touch tone
telephone.
1. Call your unit.
2. Enter the remote operation ID during the greeting
message.
3. Press
or wait 4 seconds.
4
Only the new recorded messages will be played
back.
To listen to all the recorded messages, press
the new messages have been played back.
.
Example :
ﾙｽﾃﾞﾝ ｱﾝｼｮｳ No. ?
1234
light on
after
5
21
Advertisement
Table of Contents
