Initial Setup; Password Change; Using The Tv Controller - Samsung UA55JU7000 User Manual

Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. During Initial Setup, your TV pairs with the
Samsung Smart Control, connects to your network, implements
signal, and sets up control of your cable or set-top box.
To learn more about operating your TV, launch the TV's built in
Information about the
e-Manual

Password Change

>
System Change PIN
Changing the TV's password.
1. Run and then enter the current password in the password field. The default password is "0-0-0-0".
Change PIN
2. Enter a new password and then enter it again to confirm it. The password change is complete.
- If you forgot your PIN code, press the buttons in the following sequence to reset the
When the TV turns on: MUTE

Using the TV Controller

You can use the TV Controller on the back of the TV instead of the remote control to control most of the functions of your TV.
, see "The " on page 9.
e-Manual
→ → RETURN
Volume up
English - 4
agreements, links to the source of your live TV
Smart Hub
after you have completed the Initial Setup. For
e-Manual
PIN
→ → RETURN
Volume down
: Opens
Control Menu
: Opens the menu
: Selects a source.
: Turns off the TV.
Control Stick
The is located
Control Stick
on the lower left corner of
the back of the TV.
Remote control sensor
to "0-0-0-0":
→ → RETURN
Volume up
.
Smart Hub