Safety Warnings - Potterton Sirius two WH Installation, Operation And Maintenance Instructions

Initial lighting of the boiler must be carried out by an authorised Service Engineer who must first ensure that:
• The rated data correspond to the supply (electricity, water and gas) data.
• That the installation complies with current regulations.
• The appliance is correctly connected to the power supply and earthed.
IMPORTANT INFORMATION : THIS FUNCTION MUST NOT BE USED WITH LPG GAS (G31)
The appliance must be installed in a ventilated boiler room pursuant to current regulations (appliances with heating capacity
> 40 kW).
Failure to observe the above will render the warranty null and void. The names of the authorised Service Centres are indi-
cated in the attached sheet. Prior to commissioning, remove the protective plastic coating from the boiler. Do not use any
tools or abrasive detergents to do this as you may damage the painted surfaces.
Do not leave any packaging (plastic bags, polystyrene, etc.) within the reach of children as they are a potential source of danger.

SAFETY WARNINGS

SMELL OF GAS
• Switch off the boiler.
• Do not activate any electrical device (such as switching on the light).
• Put out any naked flames and open the windows.
• Call an Authorised Service Engineer.
SMELL OF COMBUSTION FUMES
• Switch off the boiler.
• Open all the doors and windows to ventilate the room.
• Call an Authorised Service Engineer.
FLAMMABLE MATERIAL
Do not use and/or store highly flammable material (thinners, paper, etc.) near the boiler.
SERVICING AND CLEANING THE BOILER
Switch off the boiler before working on it.
The appliance is not intended to be used by persons with reduced physical, sensory or mental capacities, or who lack ex-
perience or knowledge, unless, through the mediation of a person responsible for their safety, they have had the benefit of
supervision or of instructions on the use of the appliance.
7112240.02 (1-07/13) 4