Installing An Expansion Card; Expansion Slot (Pci Express Slot) - ASROCK EPC612D4I User Manual

2.6 Expansion Slot (PCI Express Slot)

here is 1 PCI Express slot on this motherboard.
PCIE slot:
PCIE7 (PCIE 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.
Slot
PCIE 7

Installing an expansion card

Step 1. Before installing an expansion card, please make sure that the power
supply is switched of or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Step 2. Remove the system unit cover (if your motherboard is already installed
in a chassis).
Step 3. Remove the bracket facing the slot that you intend to use. Keep the
screws for later use.
Step 4. Align the card connector with the slot and press irmly until the card is
completely seated on the slot.
Step 5. Fasten the card to the chassis with screws.
Step 6. Replace the system cover.
20
Generation Mechanical
3.0 x16
Electrical Source
x16 CPU 1