Sirius Satellite Radio Status 4 User Manual page 57

Step 8: Permanently install the
FEA
l'vote.' If you are (nounling the FEA in the vehicle's headliner, skip this step.
When you are satisfied with the FEA's mounting location, remove the suction cup mounts
and peel the backing off the bead and arrow adhesive mounts. Clean the area where the
FEA will be attached with the alcohol swab. Permanently adhere the FEA in the same
position on the glass (or A-pillar)l making certain the wire is taut and is as straight as
possible (see Figure 38). If necessary, use the cable guides to hold the cable.
REMOVE REMOVE REMOVE
ADHESIVE BACKING BOTH SUCTION CUPS ADHESIVE BACKING
~~RPO~TION~8~:E:~LEGUlD!TOHO~~:CAB~
SHOULD BE TAUT WHEN THE FEA IN POSITION UNTIL IT REACHES
IS PERMANENTLY ADHERED THE INNER TRIM OR MOULDING
Figure 38
[ Installation]
57