Digital Sound; Aspect Ratio - JVC LT-40X776 User Manual

Digital Sound

You can select the optical digital sound output, either PCM or Dolby Digital when your TV is
connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can
enjoy listening in 5.1ch sound when watching digital broadcasts.
π †
è
π †
è
Notes:
• If your amplifier does not have Dolby Digital decoder, select PCM. If you don't select PCM, it
cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 23.

Aspect Ratio

You can select the aspect mode for ATSC from 4:3 or 16:9.
π †
è
π †
è
Notes:
• Set the mode to 4:3 or 16:9 before you record a program using the ATSC MONITOR OUT.
• Make sure the mode you choose is the same as the TV's aspect ratio when the recorded
program is played back, so that you can obtain a good picture quality, free from any unatural
distortions.
Downloaded from www.Manualslib.com
Press the M button
ENU
To DIGITAL SETUP
To enter
To Digital Sound
To select PCM or DOLBY DIGITAL
Press the M button when finished
ENU
Manufactured under license from Dolby Laboratories. "Dolby", and the
double-D symbol are trademarks of Dolby Laboratories.
Press the M button
ENU
To DIGITAL SETUP
To enter
To Aspect Ratio
To select 4:3 or 16:9
Press the M button when finished
ENU
manuals search engine
Digital Setup
71