Adjustment Method - Sony TRINITRON KV-BT212M80 Service Manual

e. OTHER FUNCTION VIA REMOTE COMMANDER
7, - All the data becomes the values in memory.
8, - All user control goes to the standard state.
Display, - Service data initialization (Be sure not to use usually.)
2, 5 Select Device or Category
3-2.

ADJUSTMENT METHOD

Item Number 000 HPOS
This explanation uses H POSITION as an example.
1. Select "000 HPOS" with the 1 and 4 buttons, or 2 and 5.
2. Raise/lower the data with the 3 and 6 buttons.
3. Select the optimum state. (The standard is IF for PAL reception.)
4. Write with the [MUTING] button. (The display changes to WRITE.)
5. Execute the writing with the - button. (The WRITE display will be changed to red color while excuting, and back to
SERVICE.)
Example on screen display :-
GEOM
GEOM
GEOM
Use the same method for all Items. Use 1 and 4 to select the adjustment item, use 3 and 6 to adjust, write with
[MUTING], then execute the write with -.
Note : 1. In [WRITE], the data for all items are written into memory together.
2. For adjustment items that have different standard data between 50Hz or 60Hz, be sure to use the respective
input signal after adjustment.
KV-BT212M80/P40/P52/P52/L/P52/N/BT212M81/BT212N40/BT212N50
GREEN
000 HPOS 039 SERVICE
Adjusted with [3] and [6] buttons.
GREEN
000 HPOS 039 WRITE
write with [MUTING].
RED
000 HPOS 039 WRITE
Write executed with [0].
– 13 –
RM-W101
50 VIDEO 1
50 VIDEO 1
The WRITE display
50 VIDEO 1
then returns to green
SERVICE
RM-W100 RM-W151 RM-W150