Attaching The Lens - Sony XC-333 Operating Instructions Manual

Table of Contents

Advertisement

Attaching the Lens

Special Mount Lens (not supplied)
1
Remove the lens mount
cap by turning it
1
counterclockwise.
2
Screw in the lens.
You can use the following special mount lenses (not
supplied) with the camera:
• VCL-12S12XM special (NF) mount lens (f=12mm)
• VCL-06S12XM special (NF) mount lens (f=6mm)
• VCL-03S12XM special (NF) mount lens (f=3.5mm)
• VCL-12SXM special (NF) mount lens (f=12mm)
Note
The VCL-7S12XEA special mount lens (auto-iris lens)
cannot be attached.
C-mount lens (not supplied)
1
Remove the lens mount cap by turning it
counterclockwise.
2
Screw the C-mount
adaptor into the lens
mount of the camera.
3
Screw in the lens.
2
By using the LO-999CMT C-mount lens adaptor (not
supplied), you can mount any C-mount lens that does not
project more than 4.1 mm.
4.1 mm or less
Notes
• If a C-mount lens is connected to the camera head, be sure
to secure the lens as well as the camera head when
mounting the unit.
• Using the C-mount adaptor where the unit is subject to
vibration and shock may cause damage or looseness.
1
2
3
Lens mount
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xc-333p

Table of Contents