Wireless > Wireless Mac Filter - Linksys Wireless-N Broadband Router WRT160N User Manual

Chapter3
RADIUS Port Enter the port number of the RADIUS
server. The default value is 1812.
Shared Key
Enter the key shared between the Router
and the server.
Key Renewal Enter a Key Renewal period, which instructs
the Router how often it should change the encryption
keys. The default Key Renewal time out period is 600
seconds.
RADIUS
This option features WEP used in coordination with a
RADIUS server. (This should only be used when a RADIUS
server is connected to the Router.)
Security Mode > RADIUS
IMPORTANT: If you are using WEP encryption,
always remember that each device in your
wireless network MUST use the same WEP
encryption method and encryption key, or else
your wireless network will not function properly.
RADIUS Server Enter the IP Address of the RADIUS
server.
RADIUS Port
Enter the port number of the RADIUS
server. The default value is 1812.
Shared Key
Enter the key shared between the Router
and the server.
Encrypton Select a level
64 bts 10 hex dgts or 128 bts 26 hex dgts. The
default is 64 bts 10 hex dgts.
Dual-Band Wreless-N Ggabt Router wth Storage Lnk
of WEP encryption,
Advanced Configuration
Passphrase Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key 1-4
If you did not enter a Passphrase, enter the WEP
key(s) manually.
Tx Key Select a key from the drop-down menu.
WEP
WEP is a basic encryption method, which is not as secure
as WPA.
Security Mode > WEP
Default Transmt Key
Select a Default Transmit Key
(choose which Key to use). The default is 1.
WEP Encrypton Select a level of WEP encryption, 64 bts
10 hex dgts or 128 bts 26 hex dgts. The default is
64 bts 10 hex dgts.
Passphrase
Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key 1-4
If you did not enter a Passphrase, enter the WEP
key(s) manually.
Tx Key Select a key from the drop-down menu.
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes.
Wireless > Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses
of the wireless devices transmitting within your network's
radius.
1