Step 3-Setting Modem Command Strings; Us Robotics 33.6 Fax Modem - Nokia IP100 Series Installation Manual

Step 3—Setting Modem Command Strings
22
C.
Locate the four lines that start with ttyd. These lines
(highlighted in the example above) are ttyd1, ttyd2,
ttyd3, and ttyd4.
D.
In each of the four lines, change 9600 to 38400.
E.
Save and close the file.
F.
To terminate and re-initialize the modem configuration process,
type:
kill -1 1
The next step is to set modem AT command strings. Whether or not you
need to do this and how to do this depends upon the specific modem you
have.
Here we explain how to configure two popular fax modems: the US
Robotics 33.6 Sportster and the Best Data 56K. Your modem may follow
one of these patterns.

US Robotics 33.6 fax modem

For a US Robotics 33.6 fax modem, follow these procedures:
A.
Use a terminal emulator such as HyperTerminal to enter this AT
command string. (Do not allow the terminal emulator to
configure the modem by itself because this may alter some
needed settings.)
AT B0 F1 M1 X1 Y0 &A1 &B0 &G0 &H1 &I0 &K1 &M4
&N6&P0 &R2 &S0 &T5 &U6 &Y1S0=1 &W0
IP100 Series Installation Guide