Installing The Processor Fan Module; Removing The Speaker; Installing The Speaker - Dell OptiPlex 3020M Owner's Manual

Installing the Processor Fan Module

1. Connect the speaker and fan cable to the connectors on the system board.
2. Place the processor fan module on the slot and slide it until it is secured.
3. Install the cover.
4. Follow the procedures in

Removing the Speaker

1. Follow the procedures in
2. Remove the:
a. cover
b. processor fan module
3. Perform the following steps as shown in the illustration:
a. Unthread the speaker cables from the cable clips [1].
b. Remove the screws that secure the speakers to the processor fan module [2].
c. Lift the speakers away from the processor fan module [3].
NOTE: The speaker is a part of the processor fan module.

Installing the Speaker

1. Place and align the speakers on the processor fan module.
2. Tighten the screws to secure the speaker to the processor fan module.
3. Thread the cables through the cable clips to secure it.
4. Install:
a. processor fan module
b. cover
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
27