BvAM220-230_2013_US.book Page 68 Thursday, December 4, 2014 3:03 PM
8.3 Service
Leave your Automower
winter storage. This is essential in order to keep the
mower in a good condition.
Service usually includes the following:
•
Thorough cleaning of body, chassis, blade disc,
skid plate and all other moving parts.
•
Testing of the mower's function and components.
•
Checking of wear components such as mower
blades and bearings.
•
Testing of the mower's battery capacity as well as
a recommendation of change if necessary.
•
Relubrication of both chassis halves of the mower
in order to maintain moisture and wetness
resistance.
•
If necessary the dealer can also load Automower
with new software, possibly including newly added
features.
8.4 After winter storage
Check whether Automower
charging strips need to be cleaned before using. If the
charging or contact strips appear to be burnt, clean
them using fine grade emery cloth. Check that the
mower's time and date are correct.
8.5 Cleaning
IIt is important to keep Automower
with a large amount of clippings negotiates slopes
very poorly. It is recommended to clean using a
brush.
IMPORTANT INFORMATION
Never use a high-pressure washer or even
running water to clean the Automower
Solvent must never be used when cleaning.
Underframe and blade disc
1.
Set the main switch to the OFF position.
2.
Wear protective gloves.
3.
Lift Automower
®
68 - English
8. MAINTENANCE
to a dealer for service prior to
®
, contact strips and
®
®
clean. A mower
.
®
onto its side.
®
OFF