Extending The Battery Life; Powering Your Phone On/Off - Zte Overture 2 User Manual

Installing a microSDHC™ card (not included)
The microSDHC card can be installed and removed while the phone is
powered on . Unmount the microSDHC card before removing or replacing it .
1 . Remove the back cover .
2 . Hold your microSDHC card with the metal contacts
facing down and slide it into the card slot .
Note: Some applications may require a microSDHC card
to work normally or may store certain data on it . Therefore,
it is recommended that you keep a microSDHC card
installed and not remove or replace it randomly .
3 . Press the back cover gently back into place until you hear a click .
Charging the battery
Your phone's battery should have enough power for the phone to turn on,
find a signal, and make a few calls . You should fully charge the battery as
soon as possible .
If the battery is low, there will be a pop-up message on the screen . As you
charge your phone, the screen will tell you the exact battery level each time
you wake up your phone .
If the battery is extremely low, you may be unable
to power on the phone even when it is being charged .
In this case, try again after charging the phone for at
least 10 minutes . Contact customer service if you still
cannot power on the phone after prolonged charging .
1 . Insert the charger's connector into the charging port .
Be sure to insert the connector in the correct
orientation . Do not force the connector into the port .
8
2 . Plug the charger into a standard AC wall outlet .
3 . When the battery is fully charged, unplug the charger and disconnect it
from the phone .
Warning! Use only ZTE-approved chargers and cables . The use of unapproved
accessories could damage your phone or cause the battery to explode .
Caution: Do not change the built-in rechargeable battery in your phone
by yourself . The battery can only be changed by ZTE or ZTE authorized
service provider .

Extending the battery life

Active applications, screen brightness levels, Bluetooth and Wi-Fi usage, and
GPS functionality can drain your battery . You can follow the helpful tips below
to conserve your battery power:
• Reduce the screen backlight time.
• Lower the screen brightness.
• Turn auto-sync, Wi-Fi, and Bluetooth off when not in use .
• Disable the GPS function when not in use. Most applications using this
function will periodically query the GPS satellites for your current location;
each query drains your battery .

Powering your phone on/off

Make sure the micro-SIM card is in your phone and the battery is charged .
• Press and hold the Power key to power on your phone .
• To power it off, press and hold the Power key to open the options menu .
Tap Power off .
GETTING STARTED GETTING STARTED 9