Connecting The Adapter; Setting Up The Adapter; Figure 4-3: Connecting The Adapter; Figure 4-4: Available Wireless Network - Linksys WPC54GR User Manual

2.4ghz 802.11g wireless-g notebook adapter with rangebooster
Hide thumbs Also See for WPC54GR:
Table of Contents

Advertisement

Wireless-G Notebook Adapter with RangeBooster

Connecting the Adapter

1. Locate an available CardBus slot on your notebook PC.
2. With the connector pin end facing the CardBus slot and the label facing up, slide the Adapter into the CardBus
slot until it locks in place.
3. Windows will begin copying the driver files to your computer. If Windows asks you for the original Windows
CD-ROM, insert the CD-ROM, and direct Windows to its correct location (e.g., D:\).
4. Then, click Next.
5. Windows 98 and Windows Me users may need to restart their PCs again when prompted to do so. The Power
LED should light up when the Adapter is installed correctly.

Setting up the Adapter

The next screen to appear will be the Available Wireless Network screen.
This screen provides two options for setting up the Adapter.
• Available Wireless Network. (For most users.) Use this option if you already have a network set up. The
networks available to this Adapter will be listed on this screen. You can choose one of these networks and
click the Connect button to connect to it. Click the Refresh button to update the Available Wireless Network
list.
• Manual Setup. If your network is not listed on this screen, select Manual Setup to set up the adapter
manually. This method of setting up the Adapter is intended for Advanced Users only.
The setup for each option is described, step by step, under the appropriate heading on the following pages.
Click Exit to close the Setup Wizard, if you wish to set up the Adapter later.
Available Wireless Network
The available networks are listed in the table on the center of the screen by SSID. Select the wireless network you
wish to connect to and click the Connect button. (If you do not see your network listed, you can click the Refresh
button to bring the list up again.) If the network utilizes wireless security, you will need to configure security on
the Adapter. If not, you will be taken directly to the Congratulations screen.
Chapter 4: Setting up and Connecting the Wireless-G Notebook Adapter
Connecting the Adapter

Figure 4-3: Connecting the Adapter

Figure 4-4: Available Wireless Network

7

Advertisement

Table of Contents
loading

Table of Contents