Page 1
User Manual Wine Cellar MODEL: WWT060MB WWT080MB WWT100MB WWT120MB 1. READ these instructions carefully before installing and operating the Wine Cellar. Keep them for further reference. 2. Record in the space below the “SERIAL NO.” found on the nameplate on your Wine Cellar and retain this information for future reference.
Customer Service ..................................10 Troubleshooting ..................................10 Limited Warranty ..................................11 PRODUCT REGISTRATION Thank you for purchasing our Westinghouse product. This easy- Model number to-use manual will guide you in getting the best use of your unit. Remember to record the model Serial number and serial numbers.
SAFETY INFORMATION DANGER WARNING CAUTION DANGER - Immediate hazards WARNING - Hazards or unsafe CAUTION - Hazards or unsafe which WILL result in severe practices which COULD result in practices which COULD result in personal injury or death severe personal injury or death minor personal injury IMPORTANT SAFETY INSTRUCTIONS WARNING...
SAFETY INFORMATION GROUNDING INSTRUCTIONS ELECTRICAL REQUIREMENTS The electrical requirements are a 115 volt 60 Hz, AC only, 15 amp. It is recommended that a separate circuit serving only the product be provided. The product is equipped with a 3-wire cord having a 3-prong grounding plug. It must be plugged into a wall receptacle that is properly installed and grounded.
SET UP & USE PARTS & FEATURES Model Bottle Capacity Number of Shelves Temperature Range WWT060MB 46˚ - 66˚F Temperature Control Light Switch Chrome Wire Glass Shelves Recessed Handle Fan Grill Leveling Leg Condensation Collection Tray Model Bottle Capacity Number of Shelves...
SET UP & USE PARTS & FEATURES Model Bottle Capacity Number of Shelves Temperature Range WWT100MB 54˚ - 66˚F Temperature Control Light Switch Glass Door Fan Grill Recessed Handle Chrome Wire Shelves Condensation Collection Tray Leveling Leg Model Bottle Capacity Number of Shelves Temperature Range WWT120MB...
SET UP & USE INSTALLATION GUIDE Unpack your wine cellar by removing all packaging materials like carton, base, foams, adhesive tape, etc. 2. Remove all accessories, internal packaging material used to hold shelves, ice tray, etc. in place. 3. Clean the remains of all adhesive tap used and remove all printed material supplied.
SET UP & USE OPERATION GUIDE 1. Plug in the wine cooler to power the unit on. 2. You may choose a temperature setting for your wine cooler within the range of 46° to 66° Fahrenheit or 54° to 66° Fahrenheit based on the model you purchased (Refer to pages 5 and 6).
CARE AND CLEANING CLEANING AND MAINTENANCE Warning: To avoid electric shock always unplug your wine cellar before cleaning. Ignoring this warning may result in death or injury. Caution: Before using cleaning products, always read and follow manufacturer’s instructions and warnings to avoid personal injury or product damage. General: •...
TROUBLESHOOTING & WARRANTY BEFORE YOU CALL FOR SERVICE IF THE UNIT FAILS TO OPERATE: A) Check to make sure that the unit is plugged in securely. If it is not, remove the plug from the outlet, wait 10 seconds and plug it in again securely. B) Check for a blown circuit fuse or a tripped main circuit breaker.
TROUBLESHOOTING & WARRANTY LIMITED WARRANTY Westinghouse brand is used under license. 15. Service calls to repair or replace the house fuse, reset the circuit breaker or Any repair, replacement, or warranty service, correct the wiring in the house. and all questions about this product should be 1 (855) 855- directed to W Appliance Co.
Page 12
, WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF are trademarks of Westinghouse Electric Corporation. Used under license by W Appliance Company. All Rights Reserved. Page 12...