Connecting The Wireless Access Point To The Wireless Gateway; Pairing The Wireless Access Point And Set-Top - Cisco ISB7000 Series Installation Manual

Connecting the Wireless Access Point to the Wireless
Gateway
1. Connect the 12 VDC Power Supply
plug on the access point to the wall
power outlet. Use only the power
adapter provided with the product.
2. Connect the power plug to the power
receptacle on the wireless access point.
3. Connect one end of the RJ-45
Ethernet cable to the Ethernet port on
the wireless access point.
4. Connect the other end of the RJ-45
Ethernet cable to an available Ethernet
port on your wireless gateway.
T14853
Ethernet
Reset
12VDC
T14854

Pairing the Wireless Access Point and Set-Top

1. Press the OK button on the set-top.
2. Press the WPS button on the wireless access point.
To Wall Power Outlet
1
2
1
2
3
3
4
4
5
5
Note: This illustration may vary from the actual product.
1 Ethernet Port
2 Reset
1
3 Power
2
Note: This illustration may vary from the actual product.
3
RJ-45
Cable
Ethernet
Reset
12VDC
Power Receptacle
Wireless LED
Wi-Fi Protected Setup (WPS) button
Wi-Fi Protected Setup (WPS) LED
Ethernet LED
Power LED
Connects the Wireless Access Point to a
wireless gateway
Restores factory default settings when held
for more than 5 seconds
Connects device to the external 12 VDC
power supply
Wireless
Gateway
Ethernet Port
Reset
12VDC
T14961
13