Connecting With A Hub (Not Included) - Samsung AM7500 User Manual

Connecting with a HUB (Not Included)

A
If the WAM speaker fails to connect to your network or its network connection operates
abnormally, place the speaker closer to the HUB or your router and try again.
The WAM speaker is a wireless network device. Its communications with your network
may be disrupted because of the distance between it and other devices on the network,
obstructions, or interference from other wireless devices.
Connect a LAN cable to the router and the
1
HUB.
NOTE
9 You can connect the LAN cable to any
Attach the HUB's power cord to the power port on the rear of the HUB, and then plug
2
the power cord into an electrical outlet.
The power (
3
When the pairing indicator (
The LED indicator on the speaker starts to flash.
If the HUB's pairing indicator does not flash, press the
the HUB.
NOTE
9 If you are adding multiple WAM speakers, connect all the speakers to electrical outlets. If you are not
connecting all the speakers, refer to pages 20~21.
LAN
Wireless Router
) and the HUB ( ) indicators on the HUB's front turn on.
) begins to flash, plug the speaker(s) into an outlet.
HUB
Plug In
ETHERNET SWITCH
ETHERNET SWITCH
Port on the HUB.
SPK ADD
Click here.
44 16
Plug In
on the back of the
button on the rear of