Appendix; Client For Microsoft Setup For Windows 98; Novell Netware 3.X Client Setup For Windows 98 - Linksys USB100TX User Manual

Appendix

Client for Microsoft Setup for Windows 98

If you are installing the EtherFast 10/100 USB Network Adapter in a
Windows 98 PC that you plan on logging into a NT domain server, follow the
directions below.
1. Start up Windows. Click on Start, Settings, then Control Panel. Double-
click on Network. The Network window appears. Click on the
Configuration tab.
2. In the Primary Logon Box, you have two choices. Choose one Client for
Microsoft Networks, which instructs your PC to log into an NT 4.0 or
Windows 2000 server where you already have a username and password
set up.
3. Under the the following network components are installed box, highlight
Client for Microsoft Networks and click on the Properties button.
4. The Client for Networks Properties window will appear. Under the Logon
Validation box, make sure that Log on to Windows NT domain is checked.
Enter the name of your domain into the Windows NT Domain box
5. Optional: Click on the Access Control tab. Make sure that Share-level
access control is selected; do not choose User-level access control. If
Access Control is grayed out and cannot be selected, refer to Problem 5 in
the Troubleshooting section.
6. When you're done, click OK. When asked if you want to restart your PC,
choose to do so.
The Microsoft Client portion of the Windows setup is complete.
35
Linksys EtherFast Series
®
10/100 USB Network Adapter

Novell NetWare 3.x Client Setup for Windows 98

The instructions below explain how to set up the regular Novell NetWare 3.x
client for use on a Windows 98 PC.
1. Follow the Windows 98 setup instructions.
2. Start up Windows 98. Click on Start, Settings, then Control Panel.
Double-click on Network. The Network window appears. Click on the
Configuration tab.
3. In the Primary Logon Box, choose Client for NetWare Networks. If you
don't see this option, refer to the Manually Installing Network Components
in Windows 98 section to install this component.
4. Under the The following network components are installed box, highlight
Client for NetWare Networks and click on the Properties button.
5. The Client for NetWare Networks Properties window appears. Under the
General tab, enter the name of your network's Preferred Server. Assign the
First Network Drive Letter; the default is F. Make sure the Enable logon
script processing is checked.
6. Click OK. Click on the Access Control tab. Make sure the Share-level
access control option is selected; do not select User-level access control.
7. When you're done, click OK to restart your computer.
The NetWare Client portion of your Windows setup is complete.
36