Honeywell HD3UH Configuration Manual page 22

Quick Zoom Motion Option
The camera can be set to automatically digitally zoom in when motion is detected. Select

QUICK ZOOM
Note Motion must be enabled to make the Quick Zoom option available.
MOVING
ZOOM IN
STAND BY
SYNCHRONOUS
TRACKING
REPEAT
22
ON in the MOTION menu to open the QUICK ZOOM submenu.
Sets the camera's movement speed. 30/60sec (0.5 seconds) is the default setting. 240/60sec
(4 seconds) is the maximum speed.
Sets the camera's zoom in speed. 30/60sec (0.5 seconds) is the default setting. 240/60sec (4
seconds) is the maximum speed.
Sets the dwell time for the time the camera will remain zoomed in after movement. 30/60sec (0.5
seconds) is the default setting. 240/60sec (4 seconds) is the maximum dwell time.
Sets the zoom to operate by a set cycle although there is movement.
Sets the camera to keep tracking the moving area while operating the zoom in/out.
Sets the camera to continue zooming into motion as it detects it in different parts of the camera's
field of view.