Information; Unpacking; Important Safety Information - Harman Kardon HD 3700 Owner's Manual

Information

Important Safety Information

Verify Line Voltage Before Use
Your HD3700 has been designed for use with
AC 100–240V. Connection to a line voltage other
than that for which it is intended can create a
safety and fire hazard, and may damage the unit.
If you have any questions about the voltage
requirements for your specific model, or about
the line voltage in your area, contact your selling
dealer before plugging the unit into a wall outlet.
Do Not Use Extension Cords
We do not recommend that extension cords
be used with this product. As with all electrical
devices, do not run power cords under rugs or
carpets or place heavy objects on them.
Damaged power cords should be replaced
immediately by an authorized service depot with
cords meeting factory specifications.
Handle The AC Power Cord Gently
When disconnecting the power cord from an
AC outlet always pull the plug, never pull the
cord. If you do not intend to use the unit for any
considerable length of time, disconnect the plug
from the AC outlet.
Do Not Open The Cabinet
There are no user-serviceable components inside
this product. Opening the cabinet may present
a shock hazard, and any modification to the
product will void your guarantee. If water or any
metal object such as a paper clip, wire or a staple
accidentally falls inside the unit, disconnect it
from the AC power source immediately, and
consult an authorized service station.
CAUTION: The HD3700 uses a laser system.
To prevent direct exposure to the laser beam,
do not open the cabinet enclosure or defeat
any of the safety mechanisms provided for your
protection. DO NOT STARE INTO THE LASER
BEAM. To ensure proper use of this product,
please read this owner's manual carefully and
retain it for future use. Should the unit require
maintenance or repair, please contact your local
Harman Kardon service station. Refer servicing to
qualified personnel only.
4 INFORMATION
Installation Location
n To assure proper operation, and to avoid the
potential for safety hazards, place the unit
on a firm and level surface. When placing
the unit on a shelf, be certain that the shelf
and any mounting hardware can support the
weight of the product.
n Make certain that proper space is provided
both above and below the unit for
ventilation. If this product will be installed
in a cabinet or other enclosed area, make
certain that there is sufficient air movement
within the cabinet.
n Do not place the unit directly on a carpeted
surface.
n Avoid installation in extremely hot or cold
locations, or an area that is exposed to direct
sun light or heating equipment.
n Avoid moist or humid locations.
Cleaning
When the unit gets dirty, wipe it with a clean,
soft dry cloth. If necessary, wipe it with a
soft cloth dampened with mild soapy water,
then a fresh cloth with clean water. Wipe
dry immediately with a dry cloth. NEVER use
benzene, thinner, alcohol or any other volatile
cleaning agent. Do not use abrasive cleaners,
as they may damage the finish of metal parts.
Avoid spraying insecticide near the unit.
Moving The Unit
Before moving the unit, be certain to
disconnect any interconnection cords with
other components, and make certain that you
disconnect the unit from the AC outlet.

Unpacking

The carton and shipping materials used to
protect your new HD3700 during shipment were
specially designed to cushion it from shock and
vibration. We suggest that you save the carton
and packing materials for use in shipping if you
move or should the unit ever need repair.
To minimize the size of the carton in storage, you
may wish to flatten it. This is done by carefully
slitting the tape seams on the bottom and
collapsing the carton down to a more two-
dimensional appearance. Other card board inserts
may be stored in the same manner.
Packing materials that cannot be collapsed
should be saved along with the carton in a
plastic bag.
If you do not wish to save the packaging
materials, please note that the carton and other
sections of the shipping protection are recyclable.
Please respect the environment and discard those
materials at a local recycling center.