Changing The Boot Mode - HP V1910 Series Getting Started Manual

Item
4. Delete file from flash
5. Modify BootRom password
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set BootRom password recovery
9. Set switch startup mode
0. Reboot
If you perform no operation or press a key other than Ctrl + B within one second, once the

remaining waiting time becomes zero, the system begins to automatically start up and the following
information is displayed:
Starting to get the main application file--flash:/V1910-CMW520-A1101.bin!......
.................................................................
The main application file is self-decompressing................................
...............................................................................
..............................Done!
System is starting...
User interface aux0 is available.
Press ENTER to get started.
The appearance of "Press ENTER to get started" indicates that the automatic startup of the switch is
complete.
Press Enter. The following prompt is displayed:
<HP>
You can configure the switch now.

Changing the boot mode

By default, the system starts up in fast boot mode. If you want to change the boot mode to normal, press
Ctrl + B within one second to enter the Boot ROM menu showed below:
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify BootRom password
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set BootRom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Description
Delete files from the flash memory
Modify the Boot ROM password
Enter the Boot ROM update menu
Skip the current configuration file (this configuration is valid once)
Restore the Boot ROM password
Set the startup mode of the switch
Restart the switch
32