Table of Contents
Advertisement
Dual-Mode Internet Telephony Kit
The Base Station
The base station must be connected to an ethernet port to use Skype. To make landline calls, the base station
should also be connected to a telephone line port.
Front Panel
Skype LED
Blue. The Skype LED lights up and is solidly lit during a Skype call.
PHONE LINE LED
Amber. The PHONE LINE LED lights up and is solidly lit during a landline call.
Page Button
Press this button to page your handset. To stop the page, press the right soft key on your
handset. You will also use this button if you need to register additional handsets (refer to
"Chapter 4: Using the Dual-Mode Internet Telephony Kit" for more information).
Back Panel
Line Port
Use the Line port to connect the base station to your telephone wall jack with a RJ-11
telephone cable.
Ethernet Port
Use the Ethernet port to connect the base station to your ethernet connection with an RJ-
45 ethernet cable.
Power Port
Use the power port to connect the power adapter of the base station.
Reset Button
To reset all network settings to the factory default settings, use the end of a paper clip to
push in the reset button.
4
Figure 2-2: Front Panel of Base
Figure 2-3: Side Panel of
Base Station
Chapter 2: Getting to Know the Dual-Mode Internet Telephony Kit
Page
Button
Station
The Base Station
Advertisement
Table of Contents
