ECS H67H2-M User Manual page 52

Hide thumbs Also See for H67H2-M:
Table of Contents

Advertisement

48
IA Core Current (Normal)
Use this item to control CPU Current Limit. This is for Turbo mode.
Power Limit 1 Value(Watt) (95)
Use this item to control the limit of the TDP. This is for Turbo mode.
Power Limit 2 Switch (Enabled)
Use this item to control the Power Limit 2. This is for Turbo mode.
Power Limit 2 Value (1)
Use this item to control Power Limit 2. PL2 provides an upper limit of the TDP
excursions. This is for Turbo mode.
Long duration maintainded(Tau) (1)
Use this item to control the time window over PL1 value should be maintained. This
is for Turbo mode.
Enhanced Intel SpeedStep Technology (Enabled)
This item allows users to enable or disable the EIST(Enhanced Intel SpeedStep
Technology).
Turbo Mode (Enabled)
This item allows you to control the Intel Turbo Boost Technology.
Press <Esc> to return to the Performance Tunning page.
Chipset Configuration
Scroll to this item to view the following screen:
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main
Advanced
Memory Timing Configuration
CAS# Latency (tcl)
Row Precharge Time (tRP)
RAS# to CAS# Delay (tRCD)
RAS# Active Time (tRAS)
Intel Graphics Configuration
GT OverColocking
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
Memory Timing Configuration
This item shows the information of Memory Timing Configuration.
CAS#Latency(tcl) (3)
This item determines the operation of DDR SDRAM memory CAS(colulmn address
strobe). It is recommanded that you leave this item at the default value. The 2T
setting requires faster memory that specifically supports this mode.
Row Precharge Time(tRP) (3)
This item specifies Row precharge to Active or Auto-Refresh of the same bank.
Chipset
M.I.B III
Boot
Security Save & Exit
3
3
3
9
[Disabled]
Using BIOS
Cas Latency, Range 3-15.
:Select Screen
:Select Item
Enter : Select
+/- : Value
F1:General Help
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents