AssEMbL Y iNsTrucTiONs
ELECTRONIC IGNITION: ELECTRODE ASSEMBLY
10
CH
C
Control panel, right side
D
E
CE3
F
CF
DD
CE1
CE1
CE1
TIP: The Electrode Set, main burner (CF)
and the Electrode wire, side burner
(DD), can be found attached to the
control panel (CH) heat shield, as
shown in figure C.
d. Insert the three Electrode set, main
burner (CF) wires into the Electronic
ignition assembly (CE1) as shown in
figure D.
NOTE: All main burner and side burner
CF
electrode wire connection points
are the same size.
e. Insert the Electrode wire, side burner
(DD) into the Electronic ignition
assembly (CE1), as shown in figure E.
DD
f. Insert the Instastart™ ignition button
(CE3) two wires into the Electronic
ignition assembly (CE1), as shown in
figure F.
14