AOpen AX4B Pro-533 Easy Installation Manual page 5

Dr. Voice is a great feature of AX4B Pro-533, which can identify the problems you may
encounter in the operating system. It can clearly "tell you" whether the problem is caused
from components or improper installation such as CPU, memory module, VGA, PCI
add-on card, FDD, HDD or keyboard. Dr. Voice provides four language versions: English,
German, Japanese and Chinese. You can select your preferred language by JP15 &
JP16 jumpers. However, if you want to disable this function, you may also adjust both JP1
and JP2 and set them to pin 2-3 to disable the buzzer and speaker from making out
voices.
JP15 Pin 1
Dr. Voice Language
Select Jumper
JP15 JP16
1
1
English
Japanese
Chinese
(Default)
11. JP1 Buzzer and JP2 Speaker Jumpers
This motherboard comes with another considerate option that allows you to turn off the
voice from buzzer and speaker. You can choose not to be bothered by the warning made
from Dr. Voice when it detects any error in operating system. To disable this function, set
JP1 and JP2 to pin 2-3 to stop both buzzer and speaker from sending out voices.
JP1 (Buzzer)
1
1
Enable Disable
(Default)
JP2 (Speaker)
10. Dr. Voice
JP16 Pin 1
German
12. Power-on and Load BIOS Setup
After you finish jumper settings and connect correct cables, power on and enter the
Del
BIOS Setup. Press <Del> during POST (Power On Self Test). Choose "Load Setup
Defaults" for recommended optimal performance.
13. AOpen Bonus Pack CD
You can use the autorun menu of Bonus CD. Choose the utility and driver and select model
name.
Warning: Please avoid of using "Load
Turbo Defaults", unless you are sure
your system components (CPU, DRAM,
HDD, etc.) are good enough for turbo
setting.