12 TurboTool holder (some models only) Getting Started 13 Hard floor adaptor How to Use PLEASE NOTE: Some parts may vary according to Looking After Your Machine model. Please check inside flap of box for more details. FAQs Other Information Guarantee vax.co.uk...
If the supply cord is damaged return the vacuum cleaner to a Vax authorised Service Agent or a suitably qualified person for examination, repair or adjustment. 11. Do not pull or carry this appliance by the cord. Do not use the cord as a handle, close a door on the cord or pull the cord around sharp edges or corners.
Wipe the separator with a cloth to anticlockwise to remove. remove any dirt. IMPORTANT: When the vacuum cleaner is stood in the upright position, or when using the hose and tools, the brush bar height adjust must be set to the highest position. vax.co.uk...
Page 6
IMPORTANT: It is very important to keep the filters clean to maintain maximum performance of the vacuum. Vax recommend that your filters should be cleaned at least every 3 months (depending on the level of use). Do not use detergent to clean the filters.
Any queries or concerns about using your Vax, simply visit; vax.co.uk/support – vaxireland.ie or call the maintenance/troubleshooting checks. Vax Careline. Calls are charged at the UK local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
9:00am-5:00pm we’re here if you need us Instead of taking me back to the shop, simply visit: vax.co.uk/support or call (UK) 0844 412 8455 (ROI) 1-800 928 308 Let us know what you think @VaxUK Designed in the UK vax.co.uk...