Figure 4-25 Setting Initial Measurement Functions - Agilent Technologies U1253B User's And Service Manual

U1253B User's and Service Guide
For another example, when you turn the rotary switch to
the position, the initial measurement range is Auto,
according to default factory setting. In order to choose a
different range, you will have to press the
If you prefer to have a different set of initial measurement
functions, change the M- INITIAL setting to USER, and press
button. The multimeter will then enter the INIT
the
pages. Please refer to
If FACTORY
is selected
Press Hz to save
and exit

Figure 4-25 Setting initial measurement functions

In the INIT pages, you may define your preferred initial
measurement functions. Please refer to
Press or to navigate between the two INIT pages.
Press or to choose which initial function you want to
change.
Changing the Default Settings
Figure 4- 25.
Press Hz
to edit
Press
to switch between
FACTORY and USER
Press Hz to proceed
to INIT pages
for setting up
initial measurement
Figure 4-
4
button.
or
If USER
is selected
26.
113