Table of Contents
Advertisement
REMOTE KEYLESS ENTRY SYSTEM
RKE Transmitter Battery
Replacement
Under normal use, the battery in your
Remote Keyless Entry transmitter
should last about two years. You can
tell the battery is weak if the transmit-
ter won't work at the normal range in
any location. If you have to get close to
your vehicle before the transmitter
works, it's probably time to change the
battery. Your Driver Information Center
will also advise you when the battery is
becoming weak.
Replace the Battery
1. Use a flat, thin object to separate
the bottom half from the top half of
the transmitter.
2. Remove the battery and replace it
with a new one. Make sure the
positive side of the battery faces up.
3. Put the two halves back together.
Make sure they are tightly secured.
Note: When replacing the battery, use one
three-volt CR2032 or equivalent battery. Use
care not to touch any of the transmitter cir-
cuitry. Static from your body transferred to
these surfaces may damage the transmitter.
See Section 2 of your Owner Manual.
4
COMFORT FEATURES
Adjusting the Power Seat
The power seat can be adjusted up or
down using the power height adjuster
located on the outboard side of the
driver's seat. The seat can be adjusted
forward or rearward manually.
Move the Seat Forward or
Rearward
• Lift and hold the bar under the front
of the seat to manually slide the
seat.
Raise or Lower the Entire Seat
• Press and hold the height adjuster
control up or down.
Raise or Lower the Front or Rear of
the Seat Cushion (if equipped)
The 6-way power seat also features
seat cushion adjustment.
• Press and hold the front or rear of
the control up or down.
See Section 1 of your Owner Manual.
Hide quick links:
Advertisement
Table of Contents
