Digital 328 Setup; Korg 1212 Setup - SoundCraft Digital 328 v2 Setup Manual

Wordclock Wordclock Wordclock Wordclock
To configure the Digital 328 as the wordclock master, enter the 328 Menu page by pressing the
<MENU> button to the right hand side of the LCD display. Using the rotary encoder beneath
the display, scroll up or down until the 'Clock Source Sel' menu is highlighted, and press
<ENTER>. Here, either 'Internal 44.1kHz' or 'Internal 48kHz' clock must be selected for the 328
to function as wordclock master. Set this to the samplerate you wish to work at. Press
<ENTER> to confirm the samplerate setting and <MENU> to return to the menu pages.
<Wordclock Src.>
Internal:44.1kHz
Tape Ports Tape Ports
Tape Ports Tape Ports
To ensure that the Digital 328 Tape Ports are set to ADAT to work with the 1212, enter the 328
Menu pages by pressing the <MENU> button to the right hand side of the LCD display. Using
the rotary encoder beneath the display, scroll up or down until the 'Tape Port Select' menu is
highlighted and press <ENTER>.
Now repeatedly press the Up cursor arrow until the '<Tape Ch17-24 >' menu page is displayed.
Using the rotary encoder, set the 'Bank Source' to 'ADAT'. Press the Down cursor arrow once, to
set the wordlength:
The 1212 is capable of 20-bit recording, and so for optimum results, 20-bit wordlength can be
selected here. If your audio sequencer software only allows 16-bit recording, 16-bit should be
selected. The sequencer manuals should be consulted for further information.
Set the desired wordlength on the 328 with the rotary encoder, and press <ENTER> confirm
the setting. Press the <MENU> button to return to the main menu:

Digital 328 Setup

Digital 328 Setup
Digital 328 Setup Digital 328 Setup
or
<Tape Ch17->24 >
Bank Source:ADAT
<Tape Ch17->24 >
Wordlength:
Korg 1212 Setup Guide
<Wordclock Src.>
Internal:48.0kHz
24
2
3