Reference; Programming The Remote Control - LG RZ-37LZ55 Owner's Manual

Hide thumbs Also See for RZ-37LZ55:

Table of Contents

Reference

The remote control is a multi-brand or universal remote control. It can be pro-

grammed to operate most remote-controllable devices of other manufacturers.

Note that the remote control may not control all models of other brands.

Programming a code into a remote mode

1. Test your remote control.

To find out whether your remote control can operate the component without pro-

gramming, turn on the component such as a VCR and press the corresponding

mode button (such as a DVD or VCR) on the remote control, while pointing at the

component. Test the POWER and PR

responds properly. If not, the remote requires programming to operate the device.

2. Turn on the component to be programmed, then press the corresponding mode

button (such as a DVD or VCR) on the remote control. The remote control button

of desired device is lighted.

3. Press the MENU and MUTE buttons simultaneously, the remote control is ready to

be programmed for the code.

4. Enter a code number using the number buttons on the remote control.

Programming code numbers for the corresponding component can be found on

the following pages. Again, if the code is correct, the device will turn off.

5. Press the MENU button to store the code.

6. Test the remote control functions to see if the component responds properly. If not,

repeat from step 2.

buttons to see if the component

D D

E E

Table of Contents

Show Quick Links

Table of Contents