4
2
E142665
1. Remove the jumper cable from the
ground metal surface or connecting
point, if available.
MKC (TME), enUSA
Roadside Emergencies
2. Remove the jumper cable on the
negative (-) terminal of the booster
vehicle's battery.
3. Remove the jumper cable from the
positive (+) terminal of the booster
vehicle's battery.
4. Remove the jumper cable from the
positive (+) terminal of the disabled
vehicle's battery.
1
After the disabled vehicle has been started
and the jumper cables removed, allow it to
idle for several minutes so the battery can
recharge.
POST-CRASH ALERT SYSTEM
The system flashes the turn signal lamps and
3
sounds the horn (intermittently) in the event
of a serious impact that deploys an airbag
(front, side, side curtain or Safety Canopy) or
the safety belt pretensioners.
I n f o r ma t i o n P r o v i d e d b y :
The horn and lamps will turn off when:
•
•
•
253
The hazard control button is pressed
The panic button (if equipped) is pressed
on the remote entry transmitter
Your vehicle runs out of power