Record Of Use Check; Record Of Self-Diagnosis Check - Sony DCR-VX2100 Adjustment Manual

DCR-VX2100/VX2100E

7. Record of Use check

Note: When replacing the drum assembly, initialize the data of address: A2 to AA.
Page 2
Address
A2
A3 Drum rotation counted time (BCD code)
A4
A5
A6 User initial power on date (BCD code)
A7
A8
Final condensation occurrence date
A9
(BCD code)
AA
Using method:
1) The record of use data is displayed at page: 2, addresses: A2 to AA.
Note: This data will be erased (reset) when the (upper) handle block (ZM-030 board) is removed.
Initializing method:
1) Using the adjustment remote commander, select the object address and set data: 00.

8. Record of Self-diagnosis check

Page 2
Address Self-diagnosis code
B0 "Repaired by" code (Occurred 1st time) *1
B1 "Block function" code (Occurred 1st time)
B2 "Detailed" code (Occurred 1st time)
B4 "Repaired by" code (Occurred 2nd time) *1
B5 "Block function" code (Occurred 2nd time)
B6 "Detailed" code (Occurred 2nd time)
B8 "Repaired by" code (Occurred 3rd time) *1
B9 "Block function" code (Occurred 3rd time)
BA "Detailed" code (Occurred 3rd time)
BC "Repaired by" code (Occurred 4th time) *1
BD "Block function" code (Occurred 4th time)
BE "Detailed" code (Occurred 4th time)
C0 "Repaired by" code (Occurred 5th time) *1
C1 "Block function" code (Occurred 5th time)
C2 "Detailed" code (Occurred 5th time)
C4 "Repaired by" code (Occurred the last time) *1
C5 "Block function" code (Occurred the last time)
C6 "Detailed" code (Occurred the last time)
*1 : "01" → "C", "03" → "E"
Using method:
1) The past self-diagnosis codes are displayed at page: 2, addresses: BC to C6. Refer to "SELF-DIAGNOSIS FUNCTION" for detail of
the self-diagnosis code.
Note: This data will be erased (reset) when the (upper) handle block (ZM-030 board) is removed.
Address A2 to AA
Function
Minutes
Hour (L)
Hour (H)
Year
Month
Day
Year
Month
Day
Address B0 to C6
10th place digit and 1st place digit of counted time (decimal digit)
1000th place digit and 100th place digit of counted time (decimal digit)
After setting the clock, set the date of power on next.
6-62
Remarks