Samsung GT-I9003 User Manual page 15

Hide thumbs Also See for GT-I9003:
Table of Contents

Advertisement

4
When the battery is fully charged (the battery icon is
no longer moving), unplug the travel adapter from the
device and then from the power outlet.
Do not remove the battery in the following
conditions:
While the device is charging or connected to a PC.
Within 8 seconds after you unplug the travel
adapter or PC data cable.
While the device is turning on.
Doing so may reset your time and date setting or
cause damage to the device.
To save energy, unplug the travel adapter when not
in use. The travel adapter does not have a power
switch, so you must unplug the travel adapter from
the outlet to interrupt the power supply. The travel
adapter should remain close to the socket when
in use.
14
Assembling
This Manual: http://www.manuallib.com/file/2523063
Charge with the PC data cable
Before charging, ensure that your PC is turned on.
1
Open the cover to the multifunction jack on the top of
the device.
2
Plug one end (micro-USB) of the PC data cable into the
multifunction jack.
3
Plug the other end of the PC data cable into a USB port
on a PC.
Depending on the type of PC data cable you are
using, it may take some time before charging
begins.
4
When the battery is fully charged (the battery icon is
no longer moving), unplug the PC data cable from the
device and then from the PC.

Advertisement

Table of Contents
loading

Table of Contents