Advertisement
the old logical network. Devices previously set up with the same logical network
(same network name) will appear in the device list afterward selecting this option.
Set All Devices
The Set All Devices button is used to change the logical network of all devices that
appear on the Main panel whose Device's Password had been entered for the same
logical network. A dialog window will appear to report the success of this operation.
For devices whose passwords were not entered, this operation will fail and will report
a failure message.
1.5 Diagnostics Page
The Diagnostics page shows System information and a history of all remote devices
seen over a period of time.
The Upper panel shows technical data concerning software and hardware present on
the host computer which were used to communicate over PA-1108 on the powerline
network. It shall include the following:
1. Operating System
2. Platform/Version
3. Host Network Name
10
Advertisement
