Table of Contents
Advertisement
Message
Auto StartStop Shift to
P Restart Engine
Auto StartStop Manual
Restart Required
Auto StartStop Not
Available
Engine Stopped
Engine Starting
Engine On due to Vehicle
Maneuvering
Engine On due to
Steering Wheel Maneuv-
ering
Engine On due to
Accessory Usage
Engine On Normal Oper-
ation
Engine On due to Low
Temperature
Engine On due to
Outside Air Temp
Engine On due to Engine
Warming
Engine On due to
Selected Gear
Engine On due to Steep
Grade
Engine On due to Key not
Detected
Fusion (CC7) , enUSA
Information Displays
Select park for the system to restart the engine.
The system is not functioning. A manual restart is required.
Displays when conditions are not met for the Auto StartStop
system to function properly See Auto-Start-Stop (page 142).
StartStop has shutoff the engine automatically.
StartStop is starting the engine automatically.
The wheels are at a sharp angle or the steering wheel is being
The wheels are at a sharp angle or the steering wheel is being
Engine may be on to support high demand for electrical
accessories, such as operating power windows, rear defroster,
or when using the power point.
Engine is on to support normal vehicle operation. Includes
external vehicle conditions, such as altitude, traffic, low
ambient temperature. Also includes battery outside optimal
operating conditions (state of charge and temperature), and
inadequate brake vacuum (can occur if the brake pedal is
depressed a number of times in succession).
Engine is on in order to increase the engine temperature to an
Engine is on to support normal vehicle operation due to low
outside ambient temperature.
Engine is on in order to increase the engine temperature to an
Engine is on due to a low gear selection by the transmission.
Engine is on due to a steep road grade.
Engine is on due to no key being detected by the vehicle.
98
I n f o r ma t i o n P r o v i d e d b y :
Action
turned.
turned.
acceptable level.
acceptable level.
Advertisement
Table of Contents
Troubleshooting
