If after you have read this manual you still find yourself asking about a feature or function, please visit the Twinline FAQ page located on our website. This is where we post answers to questions and where we often post product updates.
Once you are ready, and have made the connections, you can plug in the Twinline’s 15VDC power supply. This turns on the Twinline as there is no power switch. A handy cable lock may be used to secure the cable in place.
7. PhASe inverT: Reverses the effects loop polarity coming back from the AMP-B’s effect loop return. 8. efX on : Used to bypass the Twinline effects loop to audition the dry signal path. ToP PAnel feATureS Ground lifT: Lifts the effects loop ground to help eliminate hum and buzz caused by ground loops.
BAlAnCed looP: Professional +4dB balanced send & receive XLRs for studio effects processor. AmP-B efX looP: Connects from and back to the AMP-B effects loop. AmP-A efX looP: Connects from and back to the AMP-A effects loop. Radial Engineering Ltd. Twinline™ Effects Loop Router...
1. Connect the effects loop SEND from your fi rst amplifi er to the Twinline FROM AMP A input. 2. Connect the TO AMP A from the Twinline to your fi rst amplifi er’s effects loop RECEIVE jack. 3. Connect the effects loop SEND from your second amplifi er to the Twinline FROM AMP B input.
Page 7
(unbalanced) OUT position. This switch is recessed to prevent accidental switching. b. Connect from the Twinline SEND to the input of your fi rst pedal. c. Connect from your last pedal to the Twinline RECV (receive). 2. uSinG A BAlAnCed STudio ProCeSSor: a.
Plug in the Twinline’s power supply, turn on your amps. Set the send and receive loop controls on the Twinline to 12 o’clock. If your amp has variable level controls, they should be set to the manufacturer’s recommended setting to start.
® The PolAriTy reverSe Both of the Twinline effects loops are equipped with a polarity ‘invert’ switch. Some amplifiers will invert the phase as it goes through the signal path. Correct this by depressing the PHASE INVERT switch. When out of phase, one amp will sound more distant then the other.
However, if you consider all of these cables going back and forth to the Twinline and your amps, when playing live, it is best to keep the Twinline near your amp where you can hide the cable mess and keep the cables as short as possible in order to reduce susceptibility to noise.
Page 11
Connect a latching footswitch with ¼” connector to the JR2 jack on the Twinline. Once depressed, this will toggle the effects loops from Amp-1 to Amp-2. The LED indicators on the Twinline front panel will let you know which amp effects loop is active.
Page 12
® uSinG A midi SwiTCher A great way to toggle the Twinline is to use a MIDI footswitch controller. Simply take the latching contact closure output from your MIDI controller and connect it to the Twinline remote input. You can also use second contact closure to bypass the effects loops by creating the following dual mono to stereo connection.
4.5” x 2” x 6” (114 x 57 x 147mm) Weight: 2.8lbs (1.3Kg) Power: 15V 400mA Power Adapter Conditions: For use in dry locations only between 5°C and 40°C Warranty: Radial 3-year, transferable * Subject to change without notice. Radial Engineering Ltd. Twinline™ Effects Loop Router...
Page 16
THREE YEAR TRANSFERABLE LIMITED WARRANTY RADIAL ENGINEERING LTD. (“Radial”) warrants this product to be free from defects in material and workmanship and will remedy any such defects free of charge according to the terms of this warranty. Radial will repair or replace (at its option) any defective component(s) of this product (excluding fi...