SMART 453 Series Introduction Into Service Manual page 34

Instrument panel
The upper part of the instrument panel is injection molded
with a pitted surface (standard equipment) or can optionally
be manufactured with a natural fibre carrier material, which
is covered with a fabric variant corresponding to one of the
equipment lines. As on other model series, the cockpit mo-
dule is also preassembled according to standard assembly
principles.
The preassembled components include the cockpit cross-
member, air conditioner housing, wiring harness, telematics
units and others. The preassembled module is then bolted to
the vehicle in the longitudinal and transverse directions.
Instrument panel
Introduction of the New smart fortwo coupé and smart forfour | Model Series 453
– This printout will not be recorded by the update service. Status: 06/2014 –
The controls on the instrument panel include a switch panel
for the driver assistance systems next to the steering wheel
and the controls for the hazard warning system and door
locking system positioned centrally above the smart audio
system or smart media system. The operating unit for the
heater/air conditioning is also located centrally under the
smart audio system or smart media system.
Interior
P68.10-4770-00
33