Epson Stylus C110 Service Manual page 102

EPSON Stylus C110/C120/D120
If the Carriage lock lever comes off, reassemble it following
the steps below.
1. Attach the one end of the Extension Spring 0.8 to the hook
of the Carriage Lock Lever.
2. Attach the another end of the Extension Spring 0.8 to the Ink
System Unit.
3. Insert the dowel (x1) of the Carriage Lock Lever into the hole
(x1) of the Ink System Unit.
Ink System Unit
Figure 4-76. Installing Carriage Lock Lever
DISASSEMBLY/ASSEMBLY
Carriage Lock Lever
Extension Spring 0.8
Dowel and Hole
Disassembling Printer Mechanism
When installing the Ink System Unit, pay attention to the
following instructions.
• Align the dowels (x3) of the Ink System Unit with the
positioning holes (x3) of the Base Frame.
Base Frame Side
2
1
Ink System Side
3
Figure 4-77. Installing Ink Stem Unit (1)
• Align the ribs (x2) of the Ink System Unit with the grooves
(x2) of the Base Frame.
Ink System Unit
Figure 4-78. Installing Ink System Unit (2)
Revision B
3
2
1
Rib and Groove
102