Inspections And Maintenance By Dealer - Stihl FS 460 C-M Instruction Manual

English
Inspections and Maintenance
by Dealer
Maintenance Work
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
Fuel Pickup Body in Tank
Check the pickup body in the fuel
N
tank every year and have it replaced
if necessary.
The pickup body should be positioned in
the area of the tank shown in the
illustration.
38
Anti-vibration elements
Four anti-vibration elements (arrows)
are installed between the powerhead
and the drive tube. Have the system
checked if there is a noticeable increase
in vibrations.
Both vibration gaps (arrows) are preset
to the same width at the factory. If the
size of the two vibration gaps varies
greatly and/or one of them closes up,
have your servicing dealer repair the
anti-vibration system.
Wear Guard on AV Housing
There is an easily replaced wear guard
on the side of the anti-vibration housing.
The guard may wear as a result of
rubbing against the side plate of the
harness during operation and should be
replaced if necessary.
FS 460 C-M, FS 460 C-M L, FS 490 C-M, FS 490 C-M L