Franklin TDP-590 User Manual page 7

Using a USB Cable
Your device has a built-in USB port and can be connected to a power source or desktop or
laptop PC.
1. Turn off your device.
2. Connect the wide end of a USB cable to a USB port on your PC or
plug it into a power source, depending on which type of cable you
have.
3. Connect the smaller end of a USB cable to the USB port on your device.
A prompt is displayed on your device asking if you want to enter USB
mode.
4. Yes is highlighted. Press
You see a "USB" connection icon on the screen of your device when
it is properly connected to your PC. The keyboard on your device is now
disabled.
The first time you plug your device into your PC, software drivers must
install. This happens automatically. When the drivers are installed your PC
will let you know that your device is ready to use. A window may also be
opened displaying the available folders on your device. If you need to
find it, look for a drive labeled "Removable Disk".
Or you can press  to highlight No and then press
your device while it is powered through the USB cable.
to go to USB mode.
6
. This way you can use