Table of Contents
Advertisement
x Enjoying the Party Mode
You can sing duet along with any music program of TV broadcast or with any
audio/video equipment or create visual presentations (e.g., photos or video
stories) with narration and favorite background music by using the Party Mode
feature.
TV front panel
MIC 1
1
Select the input connected to your audio/video equipment.
2
Connect the microphone (not supplied) to the microphone input terminal
and switch it on.
You can begin singing or speaking from the microphone at the last TV volume
setting. You can press A/B button on remote control to switch between left ("L")
or right ("R") channel sound for VCD karaoke source only (either music or vocal)
when video input is selected and "Audio Input Fix" is set to "Off".
3
Press WEGA GATE and select "Party Mode".
4
Select "MIC 1 Level", "MIC 2 Level" or "Echo Level", then press
B or b to adjust the microphone volume and echo level of the microphone
sound, then press
5
If you want to reduce the vocal of the singer or speaker, select "On" from
"Vocal Reducer" and press
when "Audio Input Fix" is "Off" only).
6
Select "Audio Input Fix" and press
connected to the audio equipment from which you want to hear the sound:
"Video 1", "Video 2" or "DVD".
To revert to the original sound source, select "Off", then press
7
Selecting "Reset" will set your TV to the factory settings (except for "Audio
Input Fix").
Notes
• Be sure to adjust the microphone and echo level to the minimum level before plugging in and
disconnecting the microphone.
• For your own safety, do not use or plug in the microphone during lightning storms.
• Keep microphone away from the speakers and adjust its volume to avoid acoustic feedback
(howling) and distortion.
• Microphone volume will be affected by TV volume.
• "Vocal Reducer" will be set to "Off" if you select "L" or "R" channel sound.
MIC 2
L(MONO)
R
2
.
(effective for non-karaoke stereo source and
Party Mode Setup
MIC 1 Level
MIC 2 Level
Echo Level
Vocal Reducer:
Audio Input Fix:
Reset
Select
Confirm
, then press V or v to select the input
Advanced Operations
Off
Off
End
. Press V,v,
.
13
Advertisement
Table of Contents
