Advertisement
/ Off / Function button. The blue light flashes once, indicating that one photo has
been taken and saved. The device then goes back into photo standby mode. To
shoot more photos, simply repeat the above steps.
NOTE: When switching from video to photo mode, be sure to quickly press the
Power On / Off / Function button in order to save your most recent video file.
•Switching Off
In photo standby mode, press and hold Power On / Off / Function to turn the device
off. NOTE: If the device is not used for 3 minutes while in the standby mode, the
device will power off automatically. Note: Under any situation, you may power off the
device by pressing the reset button with a paper clip.
•Reset
If the device malfunctions, you may reset it by depressing the reset button.
The reset button is a tiny hole in the middle of the pen, on the opposite side of the
clip. To press reset, use the end of a small paper clip. Put the paper clip into the
reset hole and lightly press the reset button.
•Writing
Spin the barrel to extend and retract the ink cartridge.
•Charging
Advertisement
