Video Controller Board; Removing The Right Cover; Power Supply Board - Canon LBP2900 series Service Manual

Chapter 3
F-3-35
7) Disconnect the cable connector [1] found on the right side of the
machine; then, detach the full flat cable [2].
[1]
[2]
F-3-36
8) Disconnect the connector [1], and detach the engine controller PCB
[2].
F-3-37

3.1.9 Video Controller Board

3.1.9.1 Removing the Right Cover

1) Open the delivery tray [1].
2) Open the upper cover [2].
3) Remove the screw [3].
4) Remove the 4 claws [4], and slide the right cover [5] in the direction
of the arrow.
3-8
[1]
F-3-38
5) Remove the 3 claws [1], and slide the right cover [2] in the direction
of the arrow to detach.
[1]
F-3-39

3.1.10 Power supply board

3.1.10.1 Removing the Right Cover
1) Open the delivery tray [1].
2) Open the upper cover [2].
3) Remove the screw [3].
4) Remove the 4 claws [4], and slide the right cover [5] in the direction
of the arrow.
0008-7939
[2]
[4]
[3]
[4]
[5]
[2]
0008-3571